If your modem Ubee drops signals, follow the procedures below:
- hard-wire with an Ethernet cable from modem to your laptop (or PC or mac)
- get on line and type in: 192.168.0.1
- type in user name and password
- go to wireless tab
- set the radio channel to 3,4,8, or 9 (1,6,11 are default setting)
- choose tkip+aes rather than aes for encryption
- disable automatic security setting
that is it.
- hard-wire with an Ethernet cable from modem to your laptop (or PC or mac)
- get on line and type in: 192.168.0.1
- type in user name and password
- go to wireless tab
- set the radio channel to 3,4,8, or 9 (1,6,11 are default setting)
- choose tkip+aes rather than aes for encryption
- disable automatic security setting
that is it.
No comments:
Post a Comment